GetFPV
FX2216-9 1100KV
,
Details The FX2216-9 1100kv multi-rotor motor produces silky smooth performance ...GetFPV
DJI NAZA M V2 MULTI-ROTOR STABILIZATION CONTROLLER
| Motor Disarm | There are two modes of Motor Disarm |
| VU Input | 7.4V ~ 26.0 V |
| Output(V-SEN port red wire) | 3A@5V |
| (burst current | 7.5A) |
| MAX | 3.15W(0.25A@12.6V) |
| Normal | 1.638W(0.13A@12.6V) |
| Vertical | ±0.8m |
| Horizontal | ±2.5m |
| PMU | 28g |
| GPS | 27g |
| LED | 13g |
| PMU | 39.5mm x 27.5mm x 10.0mm |
| LED | 25mm x 25mm x 7.0mm |
| Notice | Flight Performance can be effected by mechanical performance and payloads |
Features:, All-in-one Design, It offers three types of control modes: GPS Atti. Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. It also can adjust automatically within the flight environment and intelligently switch between GPS Atti. Mode and Atti. Mode to make sure the flight is safe and secure. In the software at the position of the manual mode you can choose manual, attitude or failsafe; it supports one key failsafe trigger., Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction:, In course lock flying, the forward direction is the same as a recorded nose direction. See the following figures(Mode 2)：, There are four ways to start the motors, see the following picture:, When you want to start the multi-rotor, you need to perform any of the ways of CSC. During the flight, if the motors stop, you can immediately execute the CSC and the motors will start. This enhances the safety of the multi-rotor; no uncontrolled starting of the motors., Note: It has a brand new, smoother take-off algorithm, which is more stable and provides a brand-new experience and supports double spring TX; every time you let go of the throttle stick it will hover., MC:4.8V~5.5V, MC:27g, MC: 45.5mm x 32.5mm x 18.5mm,
Details New with the V2 - New case design with ...GetFPV
FATSHARK 600TVL CMOS PAN/TILT CAM
| Imager | 1/3" |
| Lens | 3.6mm |
| Operating Voltage | 3.5~5VDC |
| Operating Current | 60mA @5V |
| Weight | 33g |
Specs:, Servos:, 9g 180 degree smooth action,
Details Performance that rivals CCD at a fraction of the ...GetFPV
IMMERSIONRC TINYTELEMETRY
| Weight | only 15g |
| Dimensions (LxWxH) | L=52mm x W=17mm x H=11mm |
Package content:, 1 x TinyTelemetry unit, A forum section specific to ImmersionRC's products can be found below, in this forum end users discuss their experiences and use of the ImmersionRC products and/or receive support from other users:, ImmersionRC support - FPVLAB,
Details The TinyTelemetry is another brilliant product from ImmersionRC. With ...GetFPV
AC/DC POWER ADAPTER 12V 1.0A
| Center | Positive |
Barrel Connector Size:, 5.5mm (Outside barrel) x 2.5mm (Inside Barrel),
Details This is a 12v 1.0 amp power adapter. This ...GetFPV
IFLIGHT GIMBAL MOTOR GBM2212-80T
| Weight | 55g |
| Motor Dimensions | 28x26mm |
| Stator Dimensions | 22x12mm |
| Copper wire(OD) | 0.16mm |
| Configuration | 12N14P |
| Resistance | 15.6 ohms |
| Wind type and termination method | Star style |
| Bottom mounting holes | 16 and 19mm center to center |
| Top mounting holes | 12mm center to center |
| Camera range | 100-300grams(GoPro Size) |
GetFPV
IFLIGHT GIMBAL MOTOR GBM3508-130T
| Weight | 78g |
| Motor Dimensions | 42x17mm |
| Stator Dimensions | 35x8mm |
| Copper wire(OD) | 0.21mm |
| Configuration | 12N14P |
| Resistance | 14.3 ohms |
| Wind type and termination method | Star style |
| Bottom mounting holes | 16 and 19mm center to center |
| Top mounting holes | 12mm center to center |
| Camera range | 200-400grams |
GetFPV
FX2216-11 900KV V2
,
Details This Lumenier multi-rotor motor produces silky smooth performance with ...GetFPV
FX2216-9 1100KV V2
,
Details The Lumenier FX2216-9 1100kv multi-rotor motor produces silky smooth ...GetFPV
FM2216-11 900KV
,
Details The FM2216-11 900kv multi-rotor motor produces silky smooth performance ...GetFPV
FRSKY D4R-II 4CH 2.4GHZ ACCST RECEIVER (W/TELEMETRY)
| Compatible with FrSky two way telemetry modules | DFT, DJT, DHT, DHT-U |
| Dimension | 40*22.5*6mm |
| Weight | 5.8g / 5g (naked) |
| Operating Voltage Range | 3.5V-10.0V |
| Operating Current | 60mA |
| Operating Range | Full Range (>1.5km) |
| Resolution | 3072 (>11bit) |
Specifications:, Features:, Firmware upgradeable!,
Details This D4R-II is a full featured mini sized 4 ...GetFPV
FRSKY DELTA 8 2.4GHZ 8CH MULTI-BRAND RECEIVER
| Operating Voltage Range | 3.0V-16V (HV Version) |
| Operating Current | 30mA |
| Specified Range | 1.5km-2.5km |
| Resolution | 3072 |
| Latency | 22ms |
| Number of Channels | 8CH |
| Dimensions | 49mm×24.5mm×15 mm |
| Weight | 9.3g |
Compatible with transmitters that use the following protocols:, Hitec A-FHSS,
Details FrSky's latest all in one receiver, compatible with 3 ...GetFPV
12V STEP-UP/STEP-DOWN VOLTAGE REGULATOR
| Input voltage | 2.5 V to 18 V (can be higher than, the same as, or lower than the 12 V output) |
| Typical continuous output current | 200 mA (Up to 300 mA on 4s battery) |
| Small size | 0.40″ × 0.575″ × 0.1″ (10 mm × 15 mm × 3 mm) |
| This step-up/step-down regulator has four connections | shutdown ( |
GetFPV
1/4 MONO RX ANTENNA (UHF RECEIVER)
| Length | 164mm |
| Connector | SMA |
| Frequency | 430 - 440Mhz |
New:, highly robust, unbreakable design that always bends back to a perfect straight antenna, Specifications:, ,
Details Single-strand quarter wave antenna for the best reception quality. ...GetFPV
TBS CAIPIRINHA FPV FLYING WING
| FPV camera | TBS69 or TBS59 |
| Propulsion | 2000kV motor, 12A ESC, 3300mAh 2S |
: A complete list of required equipment is included in the,
Details NOTE Build Instructions Manual , page 20-22 Finally, the ...